Engineering, 06.05.2021 04:40 Thelazysandwich
The principal in-plane stresses and associated strains in a plate of material are σ1 = 50 ksi, σ2 = 25 ksi, ε1 = 1050 µ, and ε2 = 195 µ.
(a) This is a plane stress state, meaning the principal stress normal to this plane is zero. Is the principal strain ε3 acting normal to this plane also zero? Show why or why not. Draw the 3D Mohr’s circle for both stress and strain states.
(b) Determine the Modulus of Elasticity, E.
(c) Determine Poisson’s ratio, ν.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
Engineering, 06.07.2019 03:10
Two slings are used to lift a girder of length l and uniform weight per unit length. what is the best position for the slings if the bending moment due to the weight of the girder is to be kept to a minimum?
Answers: 2
Engineering, 06.07.2019 03:10
Asolid steel sphere (k=63.9 w m-1 k-1 , ? =7832 kg m-3 , c=0.523 kj kg-1 k-1 ), 100 mm in diameter is initially at a uniform temperature of 500o c and is suddenly quenched in a large oil bath for which t? = 100o c and h = 3200 w m-2 k-1. estimate the time required for the sphere to cool to 200o c and to 110o c
Answers: 1
You know the right answer?
The principal in-plane stresses and associated strains in a plate of material are σ1 = 50 ksi, σ2 =...
Questions
Chemistry, 14.03.2020 00:52
History, 14.03.2020 00:53
Computers and Technology, 14.03.2020 00:53
Mathematics, 14.03.2020 00:53
History, 14.03.2020 00:53
