Engineering, 06.05.2021 01:50 asdf334asdf334

A 473 V (line-line), 60 Hz, 3 phase, wye connected, 4 pole induction motor is running at rated voltage, speed, and current. The actual machine speed is 1733 rpm. The stator resistance and leakage reactance can be neglected. When the motor runs at no load, with no core losses, the speed is approximately 1800 rpm with a stator line current of 8 A. The rotor resistance referred to the stator R'r is 0.7 Ohm, and the rotor leakage reactance referred to the stator X'ir is 1.6 Ohm. (a) What is the frequency of the rotor currents at this operating point?
(b) What is the rated line current?
(c) What is the starting line current if started at full voltage?
(d) What is the rated torque?

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:20

For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor

Answers: 3

Answer

Engineering, 04.07.2019 19:10

What are the major differences between injection molding and extrusion?

Answers: 2

Answer

You know the right answer?

A 473 V (line-line), 60 Hz, 3 phase, wye connected, 4 pole induction motor is running at rated volta...

Questions