When removing masking tape: 0
pull tape straight up.
O make sure the vehicle surface temperature is above 60°F.
O make sure it is done before the detailing process.
O use a wax and grease remover to loosen the tape adhesive.
Table of Contents

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.