Engineering, 30.04.2021 20:30 Osorio5116

Consider a simply supported rectangular beam with a span length of 10 ft, a width of 8 in, and an effective depth of 20 in. Normal weight concrete is used for the beam. This beam carries a total factored load of 9.4 kips. The beam is reinforced with tensile steel, which continues uninterrupted into the support. The concrete has a strength of 4000 psi, and the yield strength of the steel is 60,000 psi. Using No. 3 bars and 60,000 psi steel for stirrups, do the followings: a. Identify the locations of the beam that do not need the shear reinforcement.
b. Identify the locations of the beam that can be reinforced with minimum web steel (i. e., with a maximum spacing).
c. What is the required spacing at the location?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

You know the right answer?

Consider a simply supported rectangular beam with a span length of 10 ft, a width of 8 in, and an ef...

Questions