Engineering, 29.04.2021 19:40 max280
1. Ammeter, voltmeter, or warning light that informs the driver of system condition. 2. Wiring that connects the parts of the system. 3. Generator that uses mechanical power to produce electricity. 4. May be used to supply current to the rotor field windings. 5. Creates a rotating magnetic field. 6. Used to produce a low-friction surface for the rotor shaft. 7. Electronic device that controls output voltage and current of alternator. 8. Provides current to initially energize alternator and helps stabilize alternator output. 9. Links engine crankshaft pulley with alternator pulley to drive alternator. 10. A stationary set of windings in the alternator.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
You know the right answer?
1. Ammeter, voltmeter, or warning light that informs the driver of system condition. 2. Wiring that...
Questions
Mathematics, 18.06.2020 16:57
Biology, 18.06.2020 16:57
Chemistry, 18.06.2020 16:57
Mathematics, 18.06.2020 16:57
Chemistry, 18.06.2020 16:57
