subject
Engineering, 25.04.2021 20:40 littlesami105

water is flowing uniformly in a finished - concrete channel of trapezoidal cross section with a bottom width of 0.8 m, side slope of 1 : 1 and the bottom slop of 0.0001. if the flow depth is measured to be 0.52 m, determine the flow rate of water through the channel.[take the meaning coefficient of the finished concrete as 0.012]​

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
question
Engineering, 04.07.2019 19:10
A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b.s. and b.s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.
Answers: 3
question
Engineering, 04.07.2019 19:20
Apreheater involves the use of condensing steam at 100°c on the inside of a bank of tubes to heat air that enters at 1 atm and 25°c. the air moves at 5 m/s in cross flow over the tubes. each tube is 1 m long and has an outside diameter of 10 mm. what is the minimum value of nl needed to achieve an outlet temperature of t 75 c? what is the corresponding pressure drop across the tube bank?
Answers: 3
You know the right answer?
water is flowing uniformly in a finished - concrete channel of trapezoidal cross section with a bott...
Questions
question
Business, 08.05.2021 04:20
Questions on the website: 13722360