subject
Engineering, 24.04.2021 06:50 andresduenas72

After completing an airfield seizure, CPT Curry needs to assess whether or not he can land his equipment and sustain air supply from his location for up to two weeks. Evaluate an airfield given an in-place soil with an airfield index of 7. Does it support a C-130 and how many passes can it sustain? Explain your answer. While in the process of preparing for his first lift of supplies, a previously unidentified UXO detonates on the airfield, causing a large crater on the runway. In detail, describe the steps required to assess if the airfield is still operational and any necessary steps to complete repairs. Superior answers will demonstrate understanding of more than one technique for Airfield Damage Repair.
CPT Curry is informed that he needs to extend the life of the airfield for up to 5,000 passes from a C-17 in order to facilitate longer term use. What should he do? Support any conclusions with the necessary calculations.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
question
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
question
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
You know the right answer?
After completing an airfield seizure, CPT Curry needs to assess whether or not he can land his equip...
Questions
question
Mathematics, 18.05.2021 09:10
Questions on the website: 13722362