Engineering, 23.04.2021 23:30 nisha87

< More RC Mini-PROJECT

The slab gwen in Fig. 1 is supposed to be constructed for an off te building at Haramayat
own The story height of the building is 4m Cross section of all interior and corner colu
mns are given below. Take the service imposed load of 4kN/m and borinish plus mer
hankal installations load as 2.5kN/m
For the given data, carryout the following tasks:
a) Analyze and design the following flat slab.
b) Design for punching shear, you can provide drop panels if necessary.
c) Sketch the full reinforcement detailing
d) Design one typical representative column
Group
1
4
5
4
5
6
5
5.5
3
6
2
6
4
5
5
4
5.5
6.5
55
5
6
Glven data
X(m)
Y(m)
Zim)
Mim)
Nim)
Olm)
Pim)
Concrete
Steel
Depth of the slabim
)
5
o alv
6.5
5.5
25/30
460
20/25
460
30/37
460
5
35/45
460
230
400.45
0
250
270
400 35 300-35
0
0
240
400*30
0
Coldim (mm)
7 7
Reinforced Concrete Structure !
HIT 2020/2021
M
N
0
P
Y

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

Answer

You know the right answer?

< More RC Mini-PROJECT

The slab gwen in Fig. 1 is supposed to be constructed for an...

Questions