Engineering, 22.04.2021 21:30 aalyssag606
A horizontal opaque flat plate is well insulated on the edges and the lower surface. The top surface has an area of 5 m2, and it experiences uniform irradiation at a rate of 5000 W. The plate absorbs 4000 W of the irradiation, and the surface is losing heat at a rate of 500 W by convection. If the plate maintains a uniform temperature of 350 K, determine the absorptivity, reflectivity, and emissivity of the plate.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 19:10
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
Engineering, 05.07.2019 10:10
What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.
Answers: 1
Engineering, 06.07.2019 03:30
Acubic shaped box has a side length of 1.0 ft and a mass of 10 lbm is sliding on a frictionless horizontal surface towards a 30 upward incline. the horizontal velocity of the box is 20 ft/s. determine how far up the incline the box will travel (report center of mass distance along the inclined surface, not vertical distance)
Answers: 1
Engineering, 06.07.2019 04:20
Amachine of mass 140 kg is mounted on springs of stiffness 1.4x10° n/m and in parallel witha viscous damper of unknown damping coefficient. the machine is subject to a harmonic excitation of 200sin150t n. the phase angle is measured as 2.58 rad. what is the damping coefficient of the viscous damper?
Answers: 2
You know the right answer?
A horizontal opaque flat plate is well insulated on the edges and the lower surface. The top surface...
Questions
Mathematics, 14.01.2020 15:31
Mathematics, 14.01.2020 15:31
Mathematics, 14.01.2020 15:31
Mathematics, 14.01.2020 15:31
