Engineering, 20.04.2021 03:10 hectorgonzalejr333
ATTENTION ALL USERS!!
IF THERE IS A LINK ON YOUR QUESTION, DO NOT (I REPEAT) DO NOT CLICK ON IT!!
IT IS A VIRUS THAT CAN BE VERY HARMFUL TO YOUR DEVICE
BE EXTREMELY CAREFUL!!
Full Of Concern,
Fellow User
P. S. : I will vote Brainliest to whoever responds "Sir, yes, Sir!" first.​
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
Engineering, 04.07.2019 19:20
Consider airflow over a flat plate of length l = 1.5 m under conditions for which transition occurs at le = 0.9 m based on the critical reynolds number, re,e = 5 x 10. evaluating the thermophysical properties of air at 400 k, determine the air velocity. (hint: use the tables to find the properties of air)
Answers: 3
Engineering, 04.07.2019 19:20
A5 kg block of fe is dropped into a very large vat of water. the fe and water initial temperatures are 95 and 25 c, respectively. the fe final temperature is 25 c and the water can be treated as a thermal reservoir,. treated as a thermal reservoir take the water to be the system and determine the entropy generation. report vour answer in kj/k.
Answers: 1
Engineering, 06.07.2019 03:20
An air-conditioning system consists of a heating section and an evaporative cooler. air enters the heating section at 10°c and 70 percent relative humidity at a rate of 30m^3/min, and it leaves the evaporative cooler at 20°c and 60 percent relatively humidity. if the air conditioning system operates at a total pressure of 98 kpa, determine (a) the temperature and relative humidity of the air when it leaves the heating section, (b) the rate of heat transfer in the heating section, and (c) the rate of water added to air in the evaporative cooler
Answers: 2
You know the right answer?
ATTENTION ALL USERS!!
IF THERE IS A LINK ON YOUR QUESTION, DO NOT (I REPEAT) DO NOT CLICK ON IT!!<...
Questions
Computers and Technology, 19.12.2019 19:31
Computers and Technology, 19.12.2019 19:31
Computers and Technology, 19.12.2019 19:31
Health, 19.12.2019 19:31
