Technician A states that one should ensure that the thermostat is fully seated in the groove and stays there before installing the housing. Technician B states that it is important that the thermostat be
installed so sensing bulb is toward the engine. Who is correct?
Select one:
A. Technician A
B. Technician B
C. Both A and B
D. Neither A nor B

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.