The material selected for the shaft design has an ultimate tensile strength, Sut, of 123 kpsi and a yield strength, Sy, of 94 kpsi. Determine the location of the critical section on the shaft. (You must provide an answer before moving to the next part.)

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.