Engineering, 09.04.2021 02:50 lesok0818
A reinforced masonry beam is designed to resist a given bending moment, using the allowable stress design method. If the effective depth is halved, while width and reinforcement are kept constant, the effect will be (A) to halve the maximum compressive stress in the masonry (B) insignificant (C) to double the maximum compression stress in the masonry (D) to quadruple the maximum compressive stress in the masonry
Answers: 3
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Engineering, 04.07.2019 19:10
The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false
Answers: 2
A reinforced masonry beam is designed to resist a given bending moment, using the allowable stress d...
Biology, 28.07.2019 01:40
History, 28.07.2019 01:40
Mathematics, 28.07.2019 01:40
Biology, 28.07.2019 01:50
History, 28.07.2019 01:50
Biology, 28.07.2019 01:50