subject
Engineering, 07.04.2021 20:40 ooferson

Problem 1 On a 20°C sunny day with no wind speed, and an air density of 1.2 kg/m², a 1500 kg vehicle travels
along an asphalt roadway with a 6° grade at 100 km/h and a rolling resistance coefficient of 0.013.
The vehicle center of gravity is located 0.6 m from the ground in the center of the 2.5 m wheelbase
with 0.66 m wheels and has a frontal area of 2.05 m² and a drag coefficient of 0.32.
Calculate the aerodynamic, grading, and rolling resistance.
Problem 2
After some engine and transmission performance upgrades, the same vehicle is taken to a test track
to find out the new vehicle top speed. The upgrades have increased engine torque to 450 Nm and
engine horsepower to 300 kW and an overall powertrain efficiency of 88%. After the upgrades, the
minimum gear ratio of the transmission is 0.9, and the differential gear ratio is 3.21.
Calculate the maximum speed of the vehicle
Problem 3
The same vehicle travels along a level asphalt roadway at 100 km/h, with a coefficient of road adhe-
sion of 0.72, and encounters a large obstacle 50 m ahead and needs to stop to avoid striking the
obstacle.
Calculate the braking force at the front and rear wheels that is required to stop just before the
obstacle.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 08:10
Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
You know the right answer?
Problem 1 On a 20°C sunny day with no wind speed, and an air density of 1.2 kg/m², a 1500 kg vehicl...
Questions
Questions on the website: 13722362