A person puts a few apples into the freezer at -13°C to cool them quickly for guests who are about to arrive. Initially, the apples are at a uniform temperature of 37°C, and the heat transfer coefficient on the surfaces is 6.3 W/m2 · °C. Treating the apples as 8.2-cm-diameter spheres and taking their properties to be ρ= 836 kg/m3, Cp = 4.05 kJ/kg · °C, k= 0.426 W/m · °C, and α= 1.43 ×10-7 m2/s, determine the center and surface temperatures of the apples in 1.9 h

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines