Use the graphical construction approach to construct the asymptotes of the impedances Z1(s) (the impedance between vin and the op amp inverting input), and Z2(s) (the impedance between the op amp inverting input and the output). Sketch these asymp- totes to scale on semilog axes, and label each asymptote with the corresponding circuit element impedance magnitude.

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.