Engineering, 06.04.2021 01:30 jonystroyer1020
g In a vapor-compression refrigeration cycle, ammonia exits the evaporator as saturated vapor at -22oC. The refrigerant enters the condenser at 16 bar and 160oC, and saturated liquid exits at 16 bar. There is no significant heat transfer between the compressor and its surroundings, and the refrigerant passes through the evaporator with a negligible change in pressure. If the refrigerating capacity is 150 kW, determine (a) the mass flow rate of refrigerant, in kg/s. (b) the power input to the compressor, in kW. (c) the coefficient of performance. (d) the isentropic compressor efficiency.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
g In a vapor-compression refrigeration cycle, ammonia exits the evaporator as saturated vapor at -22...
Questions
Computers and Technology, 29.07.2020 17:01
Mathematics, 29.07.2020 17:01
Mathematics, 29.07.2020 17:01
Computers and Technology, 29.07.2020 17:01
Mathematics, 29.07.2020 17:01
English, 29.07.2020 17:01
Social Studies, 29.07.2020 17:01
History, 29.07.2020 17:01
