Engineering, 03.04.2021 19:00 kyleee4473
Hot engine oil with heat capacity rate of 4440 w/k (product of mass flow rate and specific heat) and an inlet temperature of 150°c flows through a double pipe heat exchanger. the double pipe heat exchanger is constructed of a 1.5-m-long copper pipe (k = 250 w/m·k) with an inner tube of inside diameter 2 cm and outside tube diameter of 2.25 cm. the inner diameter of the outer tube of the double pipe heat exchanger is 6 cm. oil flowing at a rate of 2 kg/s through inner tube exits the heat exchanger at a temperature of 50°c. the cold fluid, i. e., water enters the heat exchanger at 20°c and exits at 70°c. assuming the fouling factor on the oil side and water side to be 0.00015 m2 ·k/w and 0.0001 m2 ·k/w, respectively, determine the overall heat transfer coefficient on inner and outer surface of the copper tube.
Answers: 2
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
Hot engine oil with heat capacity rate of 4440 w/k (product of mass flow rate and specific heat) and...
Mathematics, 19.05.2020 15:16
Mathematics, 19.05.2020 15:16
Chemistry, 19.05.2020 15:16
Mathematics, 19.05.2020 15:16
History, 19.05.2020 15:16
History, 19.05.2020 15:16
History, 19.05.2020 15:16
Chemistry, 19.05.2020 15:16
Physics, 19.05.2020 15:16
English, 19.05.2020 15:16
World Languages, 19.05.2020 15:16