Engineering, 03.04.2021 03:20 frankieflores02

A jet aircraft is in level flight at an altitude of 30,000 ft with an airspeed of 500 ft/s. The aircraft has a gross weight of 19,815 lb, a wingspan of 53.3 ft, and an average chord length of 6 ft. The Oswald efficiency factor is 0.81 and the zero-lift drag coefficient is equal to 0.02. The jet has two turbofan engines, each producing a maximum thrust of 3,650 lb at sea level. Required:
a. Create a plot of the drag polar for this aircraft for CL from 0 to 5. Plot CL on the vertical axis, CD on the horizontal axis, and do not include negative CL values.
b. What is the total drag coefficient at the flight condition described above?
c. What is the required thrust for level flight at this altitude in lb?
d. If the pilot runs the engines at maximum thrust, what is the instantaneous rate of climb at this altitude and velocity?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

You know the right answer?

A jet aircraft is in level flight at an altitude of 30,000 ft with an airspeed of 500 ft/s. The airc...

Questions