subject
Engineering, 02.04.2021 23:50 kaffolter25

Two identical spoons are electroplated with Ag or Cd through the use of the electrolytic cells. A current of 5.00A was supplied to each cell for 600 seconds, and the masses of the spoons before and after the electroplating were recorded. Which of the following mathematical equations can best be used to account for the much larger increase in mass of the spoon electroplated with Ag compared with the spoon electroplated with Cd? a. ÎG°= ÎH°âTÎS°
b. ÎG°=âRT lnK
c. E = E塉(RT/nF)lnQ
d. I=q/t

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
question
Engineering, 05.07.2019 23:20
Which one of the following faults cause the coffee in a brewer to keep boiling after the brewing cycle is finished? a. an open circuit in the heating element b. a short circuit at the terminals c. welded contacts on the thermostat d. a leak around the gasket
Answers: 3
question
Engineering, 06.07.2019 02:30
Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.
Answers: 1
You know the right answer?
Two identical spoons are electroplated with Ag or Cd through the use of the electrolytic cells. A cu...
Questions
Questions on the website: 13722359