Engineering, 02.04.2021 16:20 JonJon05

Presume you went into the lab and completed a GC analysis of distillates obtained from the distillation experiment. You have analyzed three chloroform:toluene mixtures by gas chromatography using a non-polar column. In the distillation lab, a total of 15 ml of the 50:50 starting material was placed in the distillation pot, and four, 3 ml fractions were collected for simple and fractional distillation. The first sample analyzed is approximately 50:50 starting material used in the distillation (undistilled mixture). The second sample analyzed is the second fraction collected during a simple distillation, and the third sample analyzed is the second fraction collected during a fractional distillation. You wish to see how the percentage of each component varies in each sample. Required:
What should you do?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

Answer

Engineering, 04.07.2019 16:10

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.

Answers: 2

Answer

You know the right answer?

Presume you went into the lab and completed a GC analysis of distillates obtained from the distillat...

Questions