You have manufactured a femoral head using 316L stainless steel. In an attempt to improve the corrosion resistance, you coat the femoral head using electrolysis in an ambient environment, which results in an approximately 10-micron coating of cobalt-chrome on top of the existing surface of the femoral head a) Draw and label the bulk and surface layers of the femoral head after electrolysis.

b) If your application is under fretting conditions, give a general explanation why or why not the cobalt-chrome coating may not appreciably improve corrosion resistance?

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.