subject
Engineering, 25.03.2021 06:00 yeet6942000

A garden hose attached with a nozzle is used to fill a 20-gallon bucket. The inner diameter of the hose is 1 inch and it reduces to 0.5 inch at the nozzle exit. If the average velocity in the hose is 8ft/s, determine a) the volume and mass flow rates of water through the hose.
b) how long it will take to fill the bucket with water.
c) the average velocity of water at the nozzle exit.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 05.07.2019 19:10
Tech a says never use a water hose to clean up dust after a repair. tech b says never use a floor scrubber to clean up dust after repairs. who is correct?
Answers: 1
question
Engineering, 06.07.2019 02:30
In a unit cell of fcc structure, indicate the position of one of the tetrahedral interstitial sites by plotting the corresponding tetrahedron. do the same for one of the octahedral interstitial sites (in a separate fcc unit cell). mark the positions of all the tetrahedral and octahedral interstitial sites in the unit cells. how many equivalent tetrahedral sites and how many equivalent octahedral sites are contained in a fcc unit cell, respectively. what is the coordination number for a tetrahedral site and what is the coordination number for an octahedral site?
Answers: 2
question
Engineering, 06.07.2019 02:30
An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?
Answers: 3
question
Engineering, 06.07.2019 03:30
The catalogue for a refrigerant 22, four-cylinder, hermetic compressor operating at 29 r/s. a condensing temperature of 40°c and an evaporating temperature of -4°c shows a refrigeration capacity of 115 kw. at this operating point, the motor (its efficiency is 90 percent) draws 34.5 kw. the bore of the cylinders is 87 mm and the piston stroke is 70 mm. the performance data are based on 8°c of sub-cooling of the liquid leaving the condenser. compute (a) the actual volumetric efficiency and (b) the compression efficiency.
Answers: 2
You know the right answer?
A garden hose attached with a nozzle is used to fill a 20-gallon bucket. The inner diameter of the h...
Questions
question
World Languages, 02.04.2020 02:58
question
English, 02.04.2020 02:58
question
Mathematics, 02.04.2020 02:58
question
Mathematics, 02.04.2020 02:58
question
English, 02.04.2020 02:58
Questions on the website: 13722361