Engineering, 23.03.2021 14:00 tierrag81
E. From the tables of ASME, fillet welding test is required for electrode diameter of 6mm: 1. State all dimensions for fillet weld assembly. 2. Determine the chemical concentration HNO3 required for etching the fillet samples for carbon steel if the acid concentration available in the laboratory is 65%. 3. Determine the requirements for acceptance of macroscopic inspection of fillet welds according to CODE.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
E. From the tables of ASME, fillet welding test is required for electrode diameter of 6mm: 1. State...
Questions
Physics, 09.04.2021 18:20
Mathematics, 09.04.2021 18:20
Physics, 09.04.2021 18:20
Health, 09.04.2021 18:20
Mathematics, 09.04.2021 18:20
Mathematics, 09.04.2021 18:20
Mathematics, 09.04.2021 18:20
