Engineering, 22.03.2021 17:30 hbked23
A shaft is made from a tube, the ratio of the inside diameter to the outside diameter is 0.6. The material must not experience a shear stress greater than 500KPa. The shaft must transmit 1.5MW of mechanical power at 1500 revolution per minute. Calculate the shaft diameter
Answers: 2
![\sqrt[3]{0.3512}](/tpl/images/1211/1473/d89b0.png)
mm = 0.7055 mm
 ---- 1 
* 1500 ) Â = 9.554 KN-M 
Another question on Engineering
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 18:20
Air flows over a heated plate Ă t a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
You know the right answer?
A shaft is made from a tube, the ratio of the inside diameter to the outside diameter is 0.6. The ma...
Questions
English, 27.03.2021 05:30
English, 27.03.2021 05:30
Health, 27.03.2021 05:30
Biology, 27.03.2021 05:30
Mathematics, 27.03.2021 05:30
Mathematics, 27.03.2021 05:30
English, 27.03.2021 05:30
Mathematics, 27.03.2021 05:30
