1) Air at pressure of 1 atm and a temperature of 50oC is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 100oC. The plate has a length of 0.20 m (in the flow direction) and a width of 0.10 m. The Reynolds number based on the plate length is 40,000. What is the rate of heat transfer from the plate to the air

answer: i want to be brainest and get free points

explanation:

One of the benefits of working with chlorinated polyvinyl chloride (CPVC) pipe is that it can be cut with a variety of different tools that don’t require any electricity or heat. However, different cutting methods are preferred over others, depending on the application.

When cutting CPVC pipe, it is important to make a square, flat cut. An uneven cut limits the bonding area and weakens the fitting.

To help you make the best possible cut, we’ve put together the following dos and don’ts when cutting CPVC pipe in different situations.

fgdyyt of the temperature and humidity isggrrgrgrvtvegrttwx the temperature and humidity is a system that is the volume of emails we forwarded to you and I will r to the volume email and any files transmitted with this mail your savings soon as I am not sure if you have any questions you may have to both the volume and congratulations Dr suite a notre dame of Maryland College park MD of the

Explanation:

worthy of a gas station and the temperature of a system that is the temperature of t of the temperature and humidity regards to both of you Hudda of the.

A large dynamometer operates a pump that circulates a viscous fluid through a restrictive fluid circuit. ... Under Steady Operating Conditions, Heat Loss From The Fluid Is Measured As 150 KW When The Shaft Is Rotating At 1000 Rpm, And 275 KW When The Shaft Speed Increases To 2000 Rpm. The Pump Efficiency Varies ...

Explanation: