Engineering, 18.03.2021 01:30 Awesomedude1157

1. Defend the importance of communication in the software deployment process. 2. A beverage company is planning to market a new soft drink. Recommend the most effective way to test the product.

3.Explain why the scenario below fails to meet the definition of alpha testing.

An electronics company has mass-produced a product that has a major design flaw: a GPS that updates incorrectly when it switches time zones.
4. Explain why the scenario below fails to thoroughly complete the step of researching the problem, the second step in the engineering design phase.

Sam’s design team lists three product goals related to expense, safety, and construction. The team determines that parents of hockey players do not want to spend more than $50 on a helmet for their 10- to 12-year-old children.
5. Analyze the different kinds of engineering that went into the development of a familiar object, such as a cell phone.

6. Change the following minimally acceptable requirement into one that reflects an ideal value: The Pee Wee helmet needs to safely deflect high-impact pucks.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

Answer

Engineering, 04.07.2019 19:10

An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.

Answers: 1

Answer

You know the right answer?

1. Defend the importance of communication in the software deployment process. 2. A beverage company...

Questions