Engineering, 18.03.2021 01:10 cloudyyt78

You have a motor such that if you give it 12 Volt, it will eventually reach a steady state speed of 200 rad/s. If it starts from rest, then it takes 1.2 second for it to reach 63.2% of the steady state speed. You attach a sensor to the motor which measures its angle very accurately. The measured angle is used by the controller whose aim is to provide voltage to the motor and make the angle of the motor same as the desired angle. Required:
a. What is the transfer function of the motor, from voltage to speed?
b. Draw the block diagram of the system with plant, controller and the feedback path.
c. What is the system type (i. e. the type of GK)?
d. If the desired speed is a constant (say 100 rad/s). What should be range of gain K of the proportional controller, so that steady state error in the speed is less than 10%? (i. e. what number K will ensure that, (desired speed - actual steady state speed)/desired speed < 0.1 ?)
e. What happens the above % error in the steady state speed as the gain K is increased?

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

Answer

You know the right answer?

You have a motor such that if you give it 12 Volt, it will eventually reach a steady state speed of...

Questions