Engineering, 12.03.2021 16:40 jacks0292
A large sign is tobe supported on two steel poles, each of which will be supported by a 500 mm diameter drilled shaft embedded into a stiff silty clay. The lateral wind load will be 5.4 kN and will act at a height of 8 m above the ground surface. This load will be equally distributed to the two poles. Using a rigid analysis, compute the required depth of embedment and the maximum moment in each drilled shat. Use a factor of safety of 3.0.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
You know the right answer?
A large sign is tobe supported on two steel poles, each of which will be supported by a 500 mm diame...
Questions
Social Studies, 21.07.2019 05:10
History, 21.07.2019 05:10
Biology, 21.07.2019 05:10
Chemistry, 21.07.2019 05:10
Biology, 21.07.2019 05:10
Health, 21.07.2019 05:10
History, 21.07.2019 05:10
Social Studies, 21.07.2019 05:10
Business, 21.07.2019 05:10
