subject
Engineering, 12.03.2021 14:50 tasiajm

g 1. The theory used to determine the maximum power of a wind turbine is (A) actuator theory, (B) Fourier theory, (C) Maxwell theory. 2. The maximum power that can be extracted by a wind turbine is (A) 0.2963, (B) 0.593, or (C) 0.5 of the available wind power. 3. The two types of HAWT are (A) , (B),and VAWT are (C) , and (D). 4. The tower shadow is one of major concern of (A) upwind turbine, (B) downwind turbine or (C) vertical wind turbine. 5. The advantages of VAWT are (A) does not need to turn toward the wind (B) all powertrain components in the ground level, and (C) very stable. 6. The self-starting VAWT is (A) Darrieus wind turbine (B) Savonius wind turbine or (C) straight blade wind turbine. 7. Smaller number of blade will require (A) higher starting speed, (B) lower starting speed, (C) can self-starting. 8. Since air flow is not confined, the interference factors are used to compensate the air flow through the blade and there are (A) and (B) 9. For a self-starting Savonius vertical wind turbine, it has relative (A) high torque or (B) low torque at low wind speed. 10. The overall power generated by a wind turbine can be determined by the linear average wind speed during the period which is (A) True, or (B) False.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
question
Engineering, 04.07.2019 19:20
Consider airflow over a flat plate of length l = 1.5 m under conditions for which transition occurs at le = 0.9 m based on the critical reynolds number, re,e = 5 x 10. evaluating the thermophysical properties of air at 400 k, determine the air velocity. (hint: use the tables to find the properties of air)
Answers: 3
question
Engineering, 04.07.2019 19:20
Air at a pressure of 1atm and a temperature of 40 c is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 120 c. the plate has a length of 0.40m (in the flow direction) and a width of 0.15m. the reynolds number based on the plate length is 50, 000. what is the rate of heat transfer from the plate to the air? if the free stream velocity of the air is doubled and the pressure is increased to 10 atm what is the rate of heat transfer?
Answers: 2
question
Engineering, 05.07.2019 10:10
What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.
Answers: 1
You know the right answer?
g 1. The theory used to determine the maximum power of a wind turbine is (A) actuator theory, (B) F...
Questions
question
English, 19.02.2021 01:50
question
Mathematics, 19.02.2021 01:50
Questions on the website: 13722361