Engineering, 10.03.2021 21:00 gentrygoated123

Bruce wants to present to his client in architectural drawing that shows the exact details of a living room kitchen bedroom and stairs in relation to other areas of the house which type of architectural drawings should Bruce use?

Answers: 1

Show answers

Answers

Answer from: emily0259

section view in a general plan.

Explanation:

In Engineering, it is a standard and common practice to use drawings and models in the design and development of buildings, tools or systems that are being used for proffering solutions to specific problems in different fields such as banks, medicine, telecommunications and industries.

Hence, an architect or design engineer make use of drawings such as pictorial drawings, sketches, or architectural (technical) drawing to communicate ideas about a plan (design) to others, record and retain informations (ideas) so that they're not forgotten and analyze how different components of a plan (design) work together.

Architectural drawing is mainly implemented with computer-aided design (CAD) software and it's typically used in plans and blueprints that illustrates how to construct a building or an object.

Additionally, architectural drawings such as a section view in a general plan, show in detail how the areas of a building relate to each other, as well as accurately illustrating the actual (true) shape and size of a building in the design and development process.

In this scenario, Bruce wants to present to his client an architectural drawing that shows the exact details of a living room, kitchen, bedroom and stairs in relation to other areas of the house. Thus, the type of architectural drawings Bruce should use is a section view in a general plan.

A section view presents a vertical perspective or view by slicing through the building; revealing the exact details of wall construction, floor-to-floor construction, height and thickness of beam, and other support systems with respect to the living room, kitchen, bedroom, etc., in the building.

Answer from: Quest

Wlficbs dkv she can ekeceiwnenfkvfeb

Answer from: Quest

answer:

truck

explanation:

its a truck maybe cause a rv is like a truck and yea but plz mark brainlest!

Another question on Engineering

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

Answer

Engineering, 04.07.2019 19:20

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2

Answers: 2

Answer

You know the right answer?

Bruce wants to present to his client in architectural drawing that shows the exact details of a livi...

Questions