Molten metal is poured into the pouring cup of a sand mold at a steady rate of 400 cm3/s. The molten metal overflows the pouring cup and flows into the downsprue. The cross section of the sprue is round, with a diameter at the top = 3.4 cm. If the sprue is 20 cm long, determine the proper diameter at its base so as to main- tain the same volume flow rate.

the proper diameter at its base so as to maintain the same volume flow rate is 1.6034 cm

Explanation:

Given the data in the question ;

flowrate Q = 400 cm³/s

cross section of the sprue is round

Diameter of sprue at the top d_top = 3.4 cm

Height of sprue = 20 cm = 0.2 m³

the proper diameter at its base so as to maintain the same volume flow rate = ?

first we determine the velocity at the sprue base

V_base = √2gh = √( 2×9.81×0.2) = √3.924 = 1.980908 m = 198.0908 cm

so, diameter of the sprue at the bottom  will be

Q = AV = [ (( πd²_bottom)/4) × V_bottom ]

d_bottom =  √(4Q/πV_bottom)

we substitute

d_bottom =  √((4×400)/(π×198.0908 ))

d_bottom =  √( 1600/622.3206)

d_bottom =  √2.571022

d_bottom =  1.6034 cm

Therefore, the proper diameter at its base so as to maintain the same volume flow rate is 1.6034 cm

answer: hi

explanation: