Engineering, 08.03.2021 22:40 shaylaahayden45061
Engine oil flows at a rate of 1 kg/s through a 5-mmdiameter straight tube. The oil has an inlet temperature of 45 C and it is desired to heat the oil to a mean temperature of 80 C at the exit of the tube. The surface of the tube is maintained at 150 C. Determine the required length of the tube. Hint: Calculate the Reynolds numbers at the entrance and exit of the tube before proceeding with your analysi
Answers: 2
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engine oil flows at a rate of 1 kg/s through a 5-mmdiameter straight tube. The oil has an inlet temp...
Mathematics, 16.10.2020 23:01
History, 16.10.2020 23:01
History, 16.10.2020 23:01
Social Studies, 16.10.2020 23:01
Mathematics, 16.10.2020 23:01
Engineering, 16.10.2020 23:01
English, 16.10.2020 23:01
Computers and Technology, 16.10.2020 23:01
Engineering, 16.10.2020 23:01
Advanced Placement (AP), 16.10.2020 23:01