Engineering, 08.03.2021 19:50 F00Dislife
Water is the working fluid in a Rankine cycle with reheat. The turbine and the pump have isentropic efficencies of 80%. Superheated vapor enters the turbine at 10 MPa, 480 °C, and the condenser pressure is 6 kPa. Steam expands through the first-stage turbine to 0.7 MPa and then is reheated to 480°C. Determine for the cycle
(a) the rate of heat addition, in kJ per kg of steam entering the first-stage turbine.
(b) the thermal efficiency.
(c) the rate of heat transfer from the working fluid passing through the condenser to the cooling water, in kJ per kg of steam entering the first-stage turbine.
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Water is the working fluid in a Rankine cycle with reheat. The turbine and the pump have isentropic...
Social Studies, 04.08.2019 22:30
Mathematics, 04.08.2019 22:30
English, 04.08.2019 22:30
Advanced Placement (AP), 04.08.2019 22:30
Biology, 04.08.2019 22:30
Mathematics, 04.08.2019 22:30