Engineering, 07.03.2021 05:30 danielapenaoypgns
Please help ASAP
Ronny wants to produce a metal sheet through which a shaft can pass. Which process will he use?
A) grinding
B) reaming
C) turning
D) milling
E) chipping
Answers: 1
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Please help ASAP
Ronny wants to produce a metal sheet through which a shaft can pass. Which process...
Mathematics, 31.05.2020 07:58
Mathematics, 31.05.2020 07:58
Mathematics, 31.05.2020 07:58
Mathematics, 31.05.2020 07:58
Mathematics, 31.05.2020 07:58
Mathematics, 31.05.2020 07:58
Mathematics, 31.05.2020 07:58
Mathematics, 31.05.2020 07:58
Business, 31.05.2020 07:58
Mathematics, 31.05.2020 07:58
Mathematics, 31.05.2020 07:58