Arrange the lines of pseudocode so that, when the LeftBumper is pressed, the robot goes at half speed for 20 feet (which takes 10 seconds) and then stops. Reorder answers 1.} // end repeat Reorder answers 2.} // end if Reorder answers 3.Repeat forever { Reorder answers 4.Drive forward Reorder answers 5.Wait 10 seconds Reorder answers 6.If LeftBumper pressed then { Reorder answers 7.Set drive velocity to 50% Reorder answers 8.Stop driving

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?