Engineering, 02.03.2021 21:10 babytea
List six (six) advantages of manufactured boards over solid boards.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 19:20
Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3
Answers: 2
Engineering, 04.07.2019 19:20
Determine the stoichiometric and actual air-fuel ratios and the mole flue gas composition for combustion with 15% excess air for raw indiana, pennsylvania raw coal.
Answers: 3
Engineering, 06.07.2019 03:20
Not a characteristic property of ceramic material (a) high temperature stability (b) high mechanical strength (c) low elongation (d) low hardness
Answers: 2
Engineering, 06.07.2019 04:10
Along steel shaft of 10 cm diameter is austenised at 870°c and then quenched in a liquid at 30oc. the average surface heat transfer coefficient is 2000 w/m2. °c. the relevant thermophysical properties of the shaft are: p=7800 kg/m", k=20 w/mk, cp=0.46 kj/kg.k calculate: a)-the time required for the center temperature to drop to 200°c. b)-the temperature at half-radius at that moment. c)-the amount of heat that had been transferred to the liquid by that time per meter length of the shaft
Answers: 1
You know the right answer?
List six (six) advantages of manufactured boards over solid boards....
Questions
World Languages, 20.09.2021 05:20
Social Studies, 20.09.2021 05:20
Chemistry, 20.09.2021 05:20
Mathematics, 20.09.2021 05:20
Social Studies, 20.09.2021 05:20
Social Studies, 20.09.2021 05:20
Mathematics, 20.09.2021 05:20
Chemistry, 20.09.2021 05:30
English, 20.09.2021 05:30
English, 20.09.2021 05:30
Mathematics, 20.09.2021 05:30
Chemistry, 20.09.2021 05:30
