5.The output stage of a first-order transducer is to be connected to a second-order display stage device. The transducer has known time constant of 5 milli-seconds and static sensitivity of 0.05 V/ oC while the display device has values of sensitivity, damping ratio, and natural frequency of 1 V/V, 0.8, and 100 Hz, respectively. Determine the steady state response of this measurement system to an input signal of the form, T(t)

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.