Pipes are okay to put
okay to put on the end of socket wrenches?...
Engineering, 26.02.2021 23:20 camosloppy3150
Pipes are okay to put
okay to put on the end of socket wrenches?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 19:10
Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]
Answers: 3
You know the right answer?
Questions
Mathematics, 22.01.2021 20:00
Mathematics, 22.01.2021 20:00
Advanced Placement (AP), 22.01.2021 20:00
Mathematics, 22.01.2021 20:00
English, 22.01.2021 20:00
Social Studies, 22.01.2021 20:00
Mathematics, 22.01.2021 20:00
English, 22.01.2021 20:00
Mathematics, 22.01.2021 20:00
Computers and Technology, 22.01.2021 20:00
