Engineering, 25.02.2021 20:00 2023jpeterson

25 In differential aeration corrosion, rich oxygenated parts are (a) anodic(b)cathodic
(c) protected (d) none of above
26
To eliminate entrapment of moisture, it is advised to
(a) make corners smooth
(b) coat the containers
(c) use corrosion resistant alloy, like cupro-nickel (d) provide a drainage hole
27 Storage containers should be designed in such a way that
(a) No crevices are formed
(b) No obstacle to drainage occurs
(c) The design should ensure that the containers are drained in minimum time
(d) the containers should be constructed from plastics rather than metals or allows
28 The corrosion resistance of metals, such as stainless steels and copper alloys.
depends upon the buildup of uniform surface films. Which one of the following
would require a maximum attention of the designer?
(a) Accessibility of oxygen in the operating medium.
(b) Coating of the metal
(c)The drainage capability of the vessel (d)
The period of storage of the liquid in the container

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

You know the right answer?

25 In differential aeration corrosion, rich oxygenated parts are (a) anodic(b)cathodic
(c) pro...

Questions