Engineering, 22.02.2021 18:50 inlace3609
It is desired to enrich the partial pressure of hydrogen in a hydrogen-nitrogen gas mixture for which the partial pressures of both gases are 0.1013 MPa (1 atm). It has been proposed to accomplish this by passing both gases through a thin sheet of some metal at an elevated temperature; inasmuch as hydrogen diffuses through the plate at a higher rate than does nitrogen, the partial pressure of hydrogen will be higher on the exit side of the sheet. The design calls for partial pressures of 0.0709 MPa (0.7 atm) and 0.02026 MPa (0.2 atm), respectively, for hydrogen and nitrogen. The concentrations of hydrogen and nitrogen (CH and CN, in mol/m3 ) in this metal are functions of gas partial pressures (pH2 and pN2, in MPa) and absolute temperature and are given by the following expressions:
CH = 2.5×10 3p H 2exp(− RT27,800J/mol​)
CN = 2.75×10 3p N 2exp(− RT37,600J/mol)
Furthermore, the diffusion coefficients for the diffusion of these gases in this metal are functions of the absolute temperature as follows:
DH(m2/s) = 1.4×10 −7 exp(− RT13,400J/mol )
DN(m2/s) = 3.0×10 −7 exp(− RT76,150J/mol )
Is it possible to purify hydrogen gas in this manner?
Answers: 1
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Engineering, 04.07.2019 19:10
An electric kettle is made out of stainless steel, weighs two pounds (when empty) and is equipped with a heating element that consumes 2 kw of electricity. assuming that the water and the kettle are at the same uniform temperature at any moment of time, calculate the shortest possible time to bring 2 quarts of water from room temperature to the onset of boiling
Answers: 2
It is desired to enrich the partial pressure of hydrogen in a hydrogen-nitrogen gas mixture for whic...
Mathematics, 16.12.2021 04:10
Mathematics, 16.12.2021 04:10
Biology, 16.12.2021 04:10
Arts, 16.12.2021 04:10
Mathematics, 16.12.2021 04:10
Mathematics, 16.12.2021 04:10
Health, 16.12.2021 04:10
Physics, 16.12.2021 04:10
Mathematics, 16.12.2021 04:10
Computers and Technology, 16.12.2021 04:10