Engineering, 21.02.2021 14:00 DepressionCentral
Find the intensity of shear of the lubricating oil if the length of the bearing is 0.2 m for a shaft of diameter 10 em having a clearance of 1.5 mm rotates at 180 rpm in a bearing which is lubricated by an oil of viscosity 100 c. p. and then find the torque.​
Answers: 3
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
Find the intensity of shear of the lubricating oil if the length of the bearing is 0.2 m for a shaft...
History, 29.10.2020 16:50
Mathematics, 29.10.2020 16:50
Business, 29.10.2020 16:50
Biology, 29.10.2020 16:50
Geography, 29.10.2020 16:50
Mathematics, 29.10.2020 16:50
Chemistry, 29.10.2020 16:50