Engineering, 17.02.2021 22:10 rsmith4531
What force, in pounds, is needed to push a 150-lb weight up a 30-ft ramp to a height of 1 foot. What is the mechanical advantage of the ramp?
Force = pounds
MA =
Answers: 2
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:20
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
Engineering, 05.07.2019 23:20
Which one of the following faults cause the coffee in a brewer to keep boiling after the brewing cycle is finished? a. an open circuit in the heating element b. a short circuit at the terminals c. welded contacts on the thermostat d. a leak around the gasket
Answers: 3
Engineering, 06.07.2019 04:10
Aheat pump that operates on the ideal vapor compression cycle with refrigerant-134a is used to heat water from 15°c to 45°c at a rate of 0.12 kg/s. the condenser and evaporator pressures are 1.4 and 0.32 mpa, respectively determine: (a) the power input to the heat pump
Answers: 1
What force, in pounds, is needed to push a 150-lb weight up a 30-ft ramp to a height of 1 foot. What...
History, 20.09.2020 09:01
History, 20.09.2020 09:01
Mathematics, 20.09.2020 09:01
Chemistry, 20.09.2020 09:01
English, 20.09.2020 09:01
Mathematics, 20.09.2020 09:01
Law, 20.09.2020 09:01
History, 20.09.2020 09:01
Engineering, 20.09.2020 09:01