A shaft rotates at a speed of 1600 rpm with two gears which transfer a vertical load of F1= 2500lb andF2= 1000lb. The shaft is supported by bearings at both ends. Determine the minimum fatigue factor of safety in order to achieve infinite life. Assume the material is machined AISI 1040 CD steel.

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above