Engineering, 16.02.2021 01:00 amandaparrish2323
Example 2.9 shows the calculated thickness at the bottom needed for steel plate making up the shell of a vertical-axis, flat-bottomed, atmospheric-pressure storage tank. In the United States such tanks are normally made from steel sheets either 8 or 10 ft wide, so their heights are normally multiples of 8 or 10 ft. The 60-ft-high tank in that example would be made of 6 bands, one atop the other, each made of steel sheets 10 ft wide, each with its own uniform thickness. The lowest band would have the thickness calculated in Example 2.9. a) What would the required thickness be for the remaining bands above the bottom band
Answers: 3
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 19:10
A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?
Answers: 3
Example 2.9 shows the calculated thickness at the bottom needed for steel plate making up the shell...
Computers and Technology, 08.04.2020 04:41
History, 08.04.2020 04:41
English, 08.04.2020 04:41
Mathematics, 08.04.2020 04:41
Physics, 08.04.2020 04:41