Engineering, 12.02.2021 01:00 izzyisawesome5232
As shown in the figure below, a monometer is attached to a tank of gas in which the pressure is 104.0 kPa. The manometer liquid is mercury, with a density of 13.59 g/cm 3 . If g = 9.81 m/s 2 and the atmospheric pressure is 101.33 kPa, calculate (a) the difference in mercury levels in the manometer, in cm, and (b) the gage pressure of the gas, in kPa.
Answers: 3
) and atmospheric pressure (
), both measured in pascals. A kilopascal equals 1000 pascals and 1 meter equals 100 centimeters. That is: 
(1)
- Density of mercury, measured in kilograms per cubic meter.
- Gravitational acceleration, measured in meters per square second.
- Difference in mercury levels, measured in meters. 
, 
, 
and 
, the difference in mercury levels in the manometer is:
(2)
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
As shown in the figure below, a monometer is attached to a tank of gas in which the pressure is 104....
Questions
Computers and Technology, 14.01.2021 09:40
Mathematics, 14.01.2021 09:50
Mathematics, 14.01.2021 09:50
Arts, 14.01.2021 09:50
Mathematics, 14.01.2021 09:50
History, 14.01.2021 09:50
Geography, 14.01.2021 09:50
Mathematics, 14.01.2021 09:50
Computers and Technology, 14.01.2021 09:50
English, 14.01.2021 09:50
