subject
Engineering, 11.02.2021 20:30 martl4175

Consider a hilly area in which new homes are being constructed. As rain falls on the site, without any controls, water running off the site would carry eroded soil particles to a nearby creek, polluting it badly. A detention pond is built to catch the particle-laden runoff at the bottom of the hill, to allow the soil particles to accumulate in the bottom of the pond while cleaner water overflows out of the pond and into the creek. For simplicity, assume that the rain is steady, all flows are steady, and ignore any transient effects on pond and water concentrations of soil particles. The water generated by the rain storm has a flow rate of 5.00 m3/min and entrains a concentration of particles of 4000. mg/L as it runs over the land. The nearby creek has a flow rate of 120. m3/min and normally carries an ambient concentration of 15.0 mg/L of soil particles. The detention pond will catch and remove most of the soil particles from the runoff, leaving outflow water (the water exiting the pond and flowing to the creek) with a concentration of 400. mg/L. Assume that 5% of the water that comes into the pond will seep down through the bottom (filtering out all particles), while the rest will over flow into the creek. a. Calculate the mass of mud accumulated in the detention ponds after three hours of this rainfall/runoff.
b. Calculate the concentration of particles in the creek after mixing with the overflow from the pond.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
question
Engineering, 04.07.2019 18:10
Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs
Answers: 2
You know the right answer?
Consider a hilly area in which new homes are being constructed. As rain falls on the site, without a...
Questions
question
Social Studies, 01.04.2021 05:30
Questions on the website: 13722367