(Need answers fast !! Will give brainliest to whoever answers first !) Pushing a button
{Choose}

Input voltage change is detected by an input pin
{Choose}

LED blinks
{Choose}

digitalRead() command
{Choose}

PWM creates high-frequency pulses
{Choose}

map() function changes a number
{Choose}

(The options for all the questions are) :
Arduino
Code
or
User

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.