Engineering, 09.02.2021 02:00 lildestinyquintana
A composite plane wall consists of a 5-in.-thick layer of insulation (ks = 0.029 Btu/h*ft*°R) and a 0.75-in.-thick layer of siding (ks = 0.058 Btu/h*ft*°R). The inner temperature of the insulation is 67°F. The outer temperature of the siding is -8°F.
Determine at steady state:
(a) the temperature at the interface of the two layers, in °F, and (b) the rate of heat transfer through the wall in Btu/h*ft^2 of surface area.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
A composite plane wall consists of a 5-in.-thick layer of insulation (ks = 0.029 Btu/h*ft*°R) and a...
Questions
Biology, 04.03.2020 04:20
Mathematics, 04.03.2020 04:20
Biology, 04.03.2020 04:20
Computers and Technology, 04.03.2020 04:20
History, 04.03.2020 04:20
Mathematics, 04.03.2020 04:20
