A vehicle comes into the shop for repairs. Tech A says to check with the service writer for the details of the customer complaint. Tech B says check with the shop supervisor to get information on the complaint. Who is correct?

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.